Skip to main content

The Making Of Ultimate TDA1541 DAC (Part 1)

Looking back from early this year, I made several well known and reputable multi bit DAC in the small size. From the portable size DAC PCM56P here and DAC PCM56P for integrated amplifier here. Then I also made the portable size USB DAC + headphone amplifier TDA1541A here. I like to made one complex circuit small. This is also testing my skill when built them. They are working well but this small and portable size DAC have to cutting some corner to fit all in. And those cutting really effect to the sound quality.

Then I also made very optimal implementation of TDA1541A USB DAC here. This optimal version is focus on the power supply circuit, the component matching and very rigid chassis. Those are the recipe for the best sounding DAC. The drawback for all of this is the bigger size casing and of course, it sound far better than the small one.

The idea for making this ultimate implantation of TDA1541A DAC comes far before I made my latest DAC based on AD1862 here. I want the DAC that push harder in the implementation with almost cost no object. So in this post, I will share this Ultimate TDA1541A DAC built.


In this part 1, I only show this DAC in completely built.

All of this building process will be cover on the next post, the part 2.

So meanwhile, please treat this post as teaser only.












Disclaimer: Any statement and photos in this article are not allowed to copy or publish without written permission from the writer. Any injury or loss from following tips in this article is not under writer responsibility.

Labels:

Comments

  1. MatthewFebruary 3, 2022 at 2:34 PM

    Hi,
    Thanks for sharing your projects! Really love the insights and how you build :)
    I'm looking to build my own TDA1541 DAC, however with Tube output stage. Do you have a good schematic for the DAC that you could share? For now I have bought a complete DAC Board that I want to use, but seeing your work I want to build it up completely from scratch :)
    Thanks and keep up the good work!

    ReplyDelete
  2. MatthewFebruary 3, 2022 at 2:36 PM

    The name is Matthew btw :)

    ReplyDelete
    Replies
    1. OrronocoFebruary 4, 2022 at 9:15 AM

      Thank you for visiting my blog.
      Actually there are many various tube output stages for current output DAC. The popular one is SRPP configuration. The key points is the value and quality of the IV resistor.
      Honestly I cannot recomend any of them since I am not a tube guy. But seeing many has successfully made a tube output (but dunno how the sound is) so I think it is not difficult at all.

      Delete
  3. MatthewFebruary 4, 2022 at 2:31 PM

    Hi, Thanks for your reaction!

    I actually found an interesting schematic: https://jelabs.blogspot.com/search/label/Digital%20Audio?m=1. He harvests a complete Chinese made board, which I also have.

    But now I’m looking for a schematic of the DAC section, including the power supply.

    Seeing your build up the number of components is limited and it looks a lot less daunting an prettier than a complete board. So much nicer actually that I want to build it myself so that I can also play around with various components. For example your capacitors look nice, are those Wima’s?

    Thanks a mil! Matthew

    ReplyDelete
    Replies
    1. OrronocoFebruary 4, 2022 at 9:41 PM

      Thanks again for this compliments 😊
      Yes, they are wima MKP10, bigger than the MKS version. They not only look pretty but they’re also give positive effect to the sound.
      The power supply is the most sensitive section especially for multi bit DAC like this. I only using 2 stages of LM317 LM337 for DAC and separate LM317 for the receiver. If you can go further more like Salas shunt regulator, I would say go ahead. As long all the components are original and hi quality, the result will be astonishing 👍

      Delete

Post a Comment

Popular posts from this blog

OPA1622 Vs. OPA627 High Performance Op-amps Comparison

This op-amps comparison topic is actually boring, but at the same time, many of us still curious about what others think about it. The reason is simply because of the op-amps variation are hundreds and they are depends by the implementation. The op-amps are considerably cheap and an interchangeable electronic components but they are not built for the same function. So in this discussion, I will focus on the modern Vs. vintage high performance op-amps in the simple non-inverting pre-amplifier gain stage.
2 comments
Read more

Vintage Multibit R2R DAC Tier List

At the very beginning of this year, I committed to explore the best multi-bit R2R DAC. This is simply because I have plenty of the resources (from broken old unit CD player of course) and ability to build them up. If you think this kind a recycle from old un-used unit to become something useful, than I should stated myself giving contribute for greener world:) After all DAC that I built in this year, I think it is better for me to list them up again in one single page like this. Then I will rank them up in a simple tier list. The reason for this, so you all know what my opinion about of those vintage multibit R2R DAC especially in the sound quality.
7 comments
Read more

TDA1543 DAC Review In 2021

It is a fine day and as usual I am reading and searching online contents related to almost anything I like. During my search, I stop to the few online forum discuss about a simple DAC using TDA1543 DAC IC. The discussion about this DAC was about 3 years ago, and the latest was about a year ago. Quite new and overall discussion about this DAC sound quality mostly are positive. It is interesting topic anyway especially I was built this TDA1543 DAC long time ago in 2016. At that time, I combine this DAC with Tripath amplifier  here  and  here  before it sold in 2019. That is also my first DIY DAC and I am quite enjoyed this DAC so much, at that time. The background story about this, previously I was using Sony Playstation SCPH-1002 as my reference CD Player. The reason I moved to this TDA1543 DAC is because the CD optic inside the Playstation is wear out and I cannot find the replacement for it. I pretty remember the sound quality of this TDA1543 DAC is quite comparable...
11 comments
Read more