Skip to main content

PCM1704 DAC Power Supply Upgrade

This post is the update from my PCM1704 DAC built.

As I always mentioned that a DAC will sound good if it is feed with a good power supply as well. It is all begin with the power transformer, regulator circuitry, the capacitors around it and the components layout. It will bring significant improvement to the DAC sound quality.

In this post, I will upgrade my previous PCM1704 DAC built with better transformer and I will make a small change to the power supply layout as well.


The new components in this upgrade is the power transformer.

I got this toroidal transformer taken from EAD DAC unit. It is a sealed toroidal transformer and has multiple secondary output that very suitable for individual power supply in this PCM1704 DAC.



Because this new transformer has multiple secondary output, then I should reconfigure the rectifier to accommodate this transformer output as well

So I will using 4 bridge diode instead previously only 1 and each diode bridge is for each secondary transformer output.




Previously, I built the PCM1704 DAC with resistor in series for each negative power supply. This method is describe in the PCM1704 Japanese version datasheet as shown bellow schematic on Figure.4.

The resistors will act as additional power supply ripple rejection, but the drawback, it makes the LM337 negative regulator power supply that feed into that IC become very hot. This might be the present of oscillation so I remove it and return back to the original design. It is now the same as Figure.3 on the schematic bellow.

In the sound comparison result, I couldn't tell the sound changed by using both method anyway.




The components upgrade list is just like that.

Now I tidy up the casing for this new transformer placement.







This new components upgrade significantly improve power supply regulator stability.

Right now all IC power supply regulators are slightly warm and the analog output are noise free, If compare to before this upgrade, there was a small hum to the speakers if I turn the amplifier volume up to the maximum.


This PCM1704 DAC after this upgrade sound more revealing simply because the background noise seems more quieter. This makes music more pleasant to hear and every harmonic are more revealing than before.

With this good result, this upgrade is worth to spent.

Cheers.




Disclaimer: Any statement and photos in this article are not allowed to copy or publish without written permission from the writer. Any injury or loss from following tips in this article is not under writer responsibility.

Comments

  1. Hi, thank you for inspirations. What ddc do you use?

    ReplyDelete

Post a Comment

Popular posts from this blog

OPA1622 Vs. OPA627 High Performance Op-amps Comparison

This op-amps comparison topic is actually boring, but at the same time, many of us still curious about what others think about it. The reason is simply because of the op-amps variation are hundreds and they are depends by the implementation. The op-amps are considerably cheap and an interchangeable electronic components but they are not built for the same function. So in this discussion, I will focus on the modern Vs. vintage high performance op-amps in the simple non-inverting pre-amplifier gain stage.

Vintage Multibit R2R DAC Tier List

At the very beginning of this year, I committed to explore the best multi-bit R2R DAC. This is simply because I have plenty of the resources (from broken old unit CD player of course) and ability to build them up. If you think this kind a recycle from old un-used unit to become something useful, than I should stated myself giving contribute for greener world:) After all DAC that I built in this year, I think it is better for me to list them up again in one single page like this. Then I will rank them up in a simple tier list. The reason for this, so you all know what my opinion about of those vintage multibit R2R DAC especially in the sound quality.

What Mazda Bose Centerpoint Does to The Music?

It has been a month since I bought and use this brand-new Mazda CX-5 as my daily cars. No doubt for the car performance, this is one of the most reliable, yet very comfortable car to drive. This Mazda CX-5 is the Elite version with 2.5-liter engine and package with Bose  audio system as a "bonus" features. This is car is very interesting, I will try to explain it from my own perspectives as a casual user, especially for the Bose audio system. Early disclaimer, I listening to this Bose audio system and in my opinion, the overall sound quality is not very special. Surprise, surprise! The sound quality is average but for sure better than most cars with non-audio brand collaboration. Let's deep down to it.