Skip to main content

The Making Of Ultimate TDA1541 DAC (Part 1)

Looking back from early this year, I made several well known and reputable multi bit DAC in the small size. From the portable size DAC PCM56P here and DAC PCM56P for integrated amplifier here. Then I also made the portable size USB DAC + headphone amplifier TDA1541A here. I like to made one complex circuit small. This is also testing my skill when built them. They are working well but this small and portable size DAC have to cutting some corner to fit all in. And those cutting really effect to the sound quality.

Then I also made very optimal implementation of TDA1541A USB DAC here. This optimal version is focus on the power supply circuit, the component matching and very rigid chassis. Those are the recipe for the best sounding DAC. The drawback for all of this is the bigger size casing and of course, it sound far better than the small one.

The idea for making this ultimate implantation of TDA1541A DAC comes far before I made my latest DAC based on AD1862 here. I want the DAC that push harder in the implementation with almost cost no object. So in this post, I will share this Ultimate TDA1541A DAC built.


In this part 1, I only show this DAC in completely built.

All of this building process will be cover on the next post, the part 2.

So meanwhile, please treat this post as teaser only.












Disclaimer: Any statement and photos in this article are not allowed to copy or publish without written permission from the writer. Any injury or loss from following tips in this article is not under writer responsibility.

Labels:

Comments

  1. MatthewFebruary 3, 2022 at 2:34 PM

    Hi,
    Thanks for sharing your projects! Really love the insights and how you build :)
    I'm looking to build my own TDA1541 DAC, however with Tube output stage. Do you have a good schematic for the DAC that you could share? For now I have bought a complete DAC Board that I want to use, but seeing your work I want to build it up completely from scratch :)
    Thanks and keep up the good work!

    ReplyDelete
  2. MatthewFebruary 3, 2022 at 2:36 PM

    The name is Matthew btw :)

    ReplyDelete
    Replies
    1. OrronocoFebruary 4, 2022 at 9:15 AM

      Thank you for visiting my blog.
      Actually there are many various tube output stages for current output DAC. The popular one is SRPP configuration. The key points is the value and quality of the IV resistor.
      Honestly I cannot recomend any of them since I am not a tube guy. But seeing many has successfully made a tube output (but dunno how the sound is) so I think it is not difficult at all.

      Delete
  3. MatthewFebruary 4, 2022 at 2:31 PM

    Hi, Thanks for your reaction!

    I actually found an interesting schematic: https://jelabs.blogspot.com/search/label/Digital%20Audio?m=1. He harvests a complete Chinese made board, which I also have.

    But now I’m looking for a schematic of the DAC section, including the power supply.

    Seeing your build up the number of components is limited and it looks a lot less daunting an prettier than a complete board. So much nicer actually that I want to build it myself so that I can also play around with various components. For example your capacitors look nice, are those Wima’s?

    Thanks a mil! Matthew

    ReplyDelete
    Replies
    1. OrronocoFebruary 4, 2022 at 9:41 PM

      Thanks again for this compliments 😊
      Yes, they are wima MKP10, bigger than the MKS version. They not only look pretty but they’re also give positive effect to the sound.
      The power supply is the most sensitive section especially for multi bit DAC like this. I only using 2 stages of LM317 LM337 for DAC and separate LM317 for the receiver. If you can go further more like Salas shunt regulator, I would say go ahead. As long all the components are original and hi quality, the result will be astonishing 👍

      Delete

Post a Comment

Popular posts from this blog

OPA1622 Vs. OPA627 High Performance Op-amps Comparison

This op-amps comparison topic is actually boring, but at the same time, many of us still curious about what others think about it. The reason is simply because of the op-amps variation are hundreds and they are depends by the implementation. The op-amps are considerably cheap and an interchangeable electronic components but they are not built for the same function. So in this discussion, I will focus on the modern Vs. vintage high performance op-amps in the simple non-inverting pre-amplifier gain stage.
2 comments
Read more

Vintage Multibit R2R DAC Tier List

At the very beginning of this year, I committed to explore the best multi-bit R2R DAC. This is simply because I have plenty of the resources (from broken old unit CD player of course) and ability to build them up. If you think this kind a recycle from old un-used unit to become something useful, than I should stated myself giving contribute for greener world:) After all DAC that I built in this year, I think it is better for me to list them up again in one single page like this. Then I will rank them up in a simple tier list. The reason for this, so you all know what my opinion about of those vintage multibit R2R DAC especially in the sound quality.
7 comments
Read more

PCM56 R2R Non Oversampling DAC Built

From early this year, I am start to playing a lot with the multibit DAC. They are from Sony CDP TDA1541A here , Nakamichi DAC-101 dual TDA1541S1 here , Clarion DRX-9255EXL PCM1702 here  and Clarion HX-D1 PCM1704 here . What I said playing with them is actually more suitable words because none of them are built by myself. I only study and exploring those unit then make some upgrade especially on the power supply components, signal capacitors upgrade, and bypassing the unused internal circuit for more clearer yet natural sound quality. This upgrade make a lot improvement compare to the first time I listen from it and I can really enjoy what the designer from each manufacture deliver the sound they would like to perform in those units. Those said units are categorized as a parts of hi-end audio system and I really now familiar with the sound signature from each of them. But to be honest, I am not satisfy yet with this condition. Because none of them is built by myself from ground up. ...
10 comments
Read more