Skip to main content

Tripath TK2050 Amplifier Updates

It is been a while since I built this Tripath TK2050 amplifier and I using this amplifier ever since.  As usual, I still curious with my own built and sometimes I need to open it up again. It is sometimes relaxing for me to see my own built, but others than that, I always try to find any parts need to be upgrade.
 

I decided to do some re-cabling and add noise suppressor clamp on the power supply cable. This noise suppressor clamp are very useful for eliminating high frequency noise which mostly give more benefit in high frequency device like this class D amplifier circuit.

 

 



Disclaimer: Any statement and photos in this article are not allowed to copy or publish without written permission from the writer. Any injury or loss from following tips in this article is not under writer responsibility.
Labels:

Comments

  1. UnknownJuly 21, 2015 at 10:43 PM

    Apakah penggantian kapasitor2 di bagian output tsb hasilnya signifikan thd peningkatan kualitas suara pak? Terima kasih

    ReplyDelete
    Replies
    1. OrronocoJuly 22, 2015 at 9:01 AM

      Hai Pak Soeprijadi, salam kenal. Penggantian caps output hanya atas dasar kesukaan saya akan brand dari caps tersebut. Peningkatan suara tidak pernah saya bandingkan sebelumnya dan saya rasa tidak berpengaruh ke suara.

      Delete

Post a Comment

Popular posts from this blog

OPA1622 Vs. OPA627 High Performance Op-amps Comparison

This op-amps comparison topic is actually boring, but at the same time, many of us still curious about what others think about it. The reason is simply because of the op-amps variation are hundreds and they are depends by the implementation. The op-amps are considerably cheap and an interchangeable electronic components but they are not built for the same function. So in this discussion, I will focus on the modern Vs. vintage high performance op-amps in the simple non-inverting pre-amplifier gain stage.
2 comments
Read more

Vintage Multibit R2R DAC Tier List

At the very beginning of this year, I committed to explore the best multi-bit R2R DAC. This is simply because I have plenty of the resources (from broken old unit CD player of course) and ability to build them up. If you think this kind a recycle from old un-used unit to become something useful, than I should stated myself giving contribute for greener world:) After all DAC that I built in this year, I think it is better for me to list them up again in one single page like this. Then I will rank them up in a simple tier list. The reason for this, so you all know what my opinion about of those vintage multibit R2R DAC especially in the sound quality.
7 comments
Read more

PCM56 R2R Non Oversampling DAC Built

From early this year, I am start to playing a lot with the multibit DAC. They are from Sony CDP TDA1541A here , Nakamichi DAC-101 dual TDA1541S1 here , Clarion DRX-9255EXL PCM1702 here  and Clarion HX-D1 PCM1704 here . What I said playing with them is actually more suitable words because none of them are built by myself. I only study and exploring those unit then make some upgrade especially on the power supply components, signal capacitors upgrade, and bypassing the unused internal circuit for more clearer yet natural sound quality. This upgrade make a lot improvement compare to the first time I listen from it and I can really enjoy what the designer from each manufacture deliver the sound they would like to perform in those units. Those said units are categorized as a parts of hi-end audio system and I really now familiar with the sound signature from each of them. But to be honest, I am not satisfy yet with this condition. Because none of them is built by myself from ground up. ...
10 comments
Read more